Leland Industries, Inc.

ASSEMBLED WITH ONE HEX NUT AND ONE WASHER  - BOLTS, WASHERS & NUTS ARE ALSO AVAILABLE SEPARATELY

• Structural Bolts are available in Spec. ASTM A-325 Type 1, & Type 1 Hot Galvanized, Spec. ASTM-325, Type 3 (Weathering) & ASTM A-490
• Fully threaded bolts are available in most diameters
• Made to ASTM F969 for use with A325 and A490 bolts
• Provides high consistent bolt tension in heavy hex structural bolts.

HEX & FLANGE HEAD SERRATED LOCKING BOLTS

• Serrated washer face ensures locking action when fastener is tightened
• Separate locking washers are not required
• Serrated Flange Nuts are also available
• Full body Grade 8 Plain Flange bolts available special order

METAL PANEL TO METAL GIRT OR PURLIN, STITCHING AND STRUCTURAL APPLICATIONS

• Master Drillers are available in nine head styles
• Available in # 6 to # 18 diameter & in lengths from 3/8” to 8”. #14 lengths to 8’’. Drilling capacities to .500”
• Six Lobe Drive available on special order
• Master Drillers with High Hex Washer heads are available with pilot points that prevent jacking when drilling multiple sheets
• Master Seal Washers are one piece, galvanized steel, aluminum or stainless steel vulcanized to an EPDM sealing washer - no leaks
• Drillers are available in Case Hardened Steel & 410 Case Hardened Stainless Steel
• Structural drillers 12-24 x 7/8” drill up to 3/8” steel, 1-1/4”, 1-1/2”, 2” - drill up to 1/2” steel
• Structural drillers in 1/4 - 20 HWH / 5 Point, 3’’ to 12’’
• Flange Head design provides maximum pullover resistance
• Structural drillers are available NZF3000 coated for increased corrosion resistance

Applications:

• Panel over insulation to steel frame
• HVAC assembly
• Stitching roof, wall, decking or fascia panels
• Metal decking • Liner panels • Wood fascia to steel • Z bar to structure

Design Excellence

Master Flash® design meets all roofing needs. Sleeve flexibility accommodates vibration and pipe movement caused by expansion contraction. The soft aluminum base easily conforms to most metal roof profiles.

Weather Protection

Made or EPDM, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.

Base Flexibility

The base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

Easy On-Site Customization

Fast, one piece construction allows for easy on-site installation usually 5 minutes.

Modification Made Simple

Easy to see pipe diameters make for painless on-site installation